TENZI Q7 Crystal Ceramic Quartz Coating

Q7 Crystal – Super hydrophobic crystal gloss permanent quartz paint coating

Well-known ceramic coating applied successfully on thousands of cars around the world.
It’s nano-particles create a hydrophobic, durable, and high gloss protection layer.

How to apply the product:
1. Shake the bottle well before use and wait 3 minutes before opening.
2. Wrap the small cloth around soft side of the applicator.
3. Apply a few drops of Q7 Crystal onto an applicator covered with a small cloth.
4. Apply a thin and even layer onto one paintwork section.
5. Leave the layer on the surface for approx. 3-5 minutes (bonding time).
6. Buff the surface with a microfibre towel to a high gloss.
7. Move to the next paintwork section.

Attention: Do not apply Q7 to hot surfaces or in direct sunlight.

It is good to know that:
If you want to know if the product is ready to buff, first try to move a hanging towel over drying coating. If the towel slides easily then wait a few minutes until the surface will start to slow it down.
For best results put up to 3 layers of the product with a minimum time interval of 3 hours.

What you need to know:
1. Use thin rubber protective gloves.
2. Apply indoors only with a temperature of 18-24 C.
3. Make sure the car paint is clean and cool.
4. Degrease and remove old coatings from car paint before application.
5. Apply additional layers with a minimum time interval of 3 hours.
6. Drying time after application of last layer – 8 hours.