KILLERWAXX #3 Final/Swirl Remover

Killerwaxx #3 Final/Swirl Remover is an extremely fine, non-diminishing abrasive polish is designed to remove light buffing marks and swirl marks while creating a high-gloss finish. Recommended as a Machine Polish/Glaze after compounding, or as a stand-alone for light cut polishing needs, outstanding results are realised on all types of paint/clear including OEM and customs without dusting or swirling.

Directions:

1. Always apply to a clean, cool and dry surface. 
2. Using a Finish Pad run buffer 1000 – 1500 RPM. Hold pad flat to the surface starting out slow, then speeding up applying light to medium pressure to remove swirls and fine scratches. Continue with overlapping passes while moving slowly side to side.

4. Reapply as required, but always lighten pressure on final passes and avoid dry buffing. 
5. Leave a slight wet film for final hand wipe down using a clean and dry microfibre cloth. 

DO NOT USE PAPER TOWELS for final wipe down after machine polishing. If you see small scratches after wiping down, you are using the wrong pad or cloth.